Fluorite point, lighted. Please read note about the electrics!

A naturally coloured fluorite point, faceted and polished.  The greens and purple blues are really quite intense.  It is mounted on a black plastic base and lit from below to make the colours just glow!  The specimen looks good even when not lighted.

NB: The light is a 3V LED, so can be run directly from a 3V battery or 3V DC transformer.  I am also including a rectifier and shrink tubing for the joins that you can add to the wires in order to run it directly from a standard 12V dollhouse transformer circuit.  If you are sure that you don't need the rectifier, please make a note with your order and I'll refund $2 for each rectifier not needed.  You can run up to four 3V LEDs through one rectifier.  If you plug the LED without the rectifier into a source higher than 3V and/or AC you WILL blow the light (I've accidentally done it with a 9V supply...).  The attached wires are approximately 7 inches (17.8 cm) long and the rectifier unit adds another 12 inches of wire.

5/8 inch (1.6 cm) wide, just under 3/4 inch (1.9 cm) deep and 1 5/8 inches (4.1 cm) tall.